Admixtures for low-carbon cements
vol.210 (2026) Chemistry of hydrogrossular
vol.210 (2026) From on-line to in-line quality control of the bulk yield stress for digitally fabricated concrete
vol.210 (2026) Revealing air-liquid dynamics during long-term saturation of cementitious materials via X-ray CT
vol.210 (2026) Perspectives on waste materials and by-products integration into 3D concrete printing (3DCP)
vol.210 (2026) Early-age drying, shrinkage, and cracking in printable and printed cementitious materials
vol.210 (2026) Climate change contribution of 3D printing technologies: the trade-off between material and process impacts and its dependency on geometry
vol.210 (2026) Understanding the thermal behaviour of MSWI bottom ash foamed ternary geopolymer: The fundamental role of pore structure
vol.210 (2026) Mitigating the strength–accuracy trade-off in calcium aluminate cement-based selective cement activation 3D printing via powder-bed regulation of liquid penetration
vol.210 (2026) Modified bauxite residue blended cements – The effects of Na- and Al-rich pozzolans on phase assemblage and pore solution composition
vol.210 (2026) Hydrodynamic viscosity of highly concentrated cement suspensions: A comparative study on the determination methods
vol.210 (2026) Spectroscopic and thermodynamic insights into selenite sorption on hydrotalcite-pyroaurite solid solutions
vol.210 (2026) Role of initial pH on the formation and carbonation kinetics of calcium silicate hydrate (C-S-H)
vol.210 (2026) Comparing polycarboxylate and -phosphate ethers as stabilizers for C-S-H based cement accelerators
vol.210 (2026) Multistep atomistic investigation of nonclassical nucleation pathways in GPTMS/PVA-modified cementitious composites
vol.210 (2026) A study on the crystallization kinetics and nucleation rate models of MICP based on microfluidic experiments and numerical simulation
vol.210 (2026) Deformation of cement-based materials under drying with thermal cycling: Mechanisms governed by C-S-H solid-moisture interactions
vol.210 (2026) The path to low-carbon 3D printable concrete: Benchmarking the present to shape the future
vol.210 (2026) Thermodynamic properties of alumina-silica gels in cementitious materials
vol.210 (2026) Enhancement of mechanical performance in metakaolin-based geopolymer by cyclic loading and creep process in relation with microstructural evolution
vol.210 (2026) Design of ultra-low water content geopolymers through particle packing optimization: Reaction kinetics and performance
vol.210 (2026) Enhanced cementing efficiency of calcium silicate hydrate in cement pastes under elevated-temperature curing: decoupling from pore structure effects
vol.210 (2026) Validation of 5-minute UR2 on a dataset of 140+ calcined clays via low-cost colorimetry
vol.210 (2026) Inferring the effect of chemical additives on early-stage hydration and phase assemblage of magnesia-clay-based cement
vol.210 (2026) Machine learning-powered inverse design for 3D-printable engineered cementitious composites (3DP-ECC): Advancing insights into rheological properties
vol.209 (2026) Framing the future: 3D concrete printing, hybrid manufacturing and the role of artificial intelligence and machine learning
vol.209 (2026) Functionalized carboxymethyl chitosan synthesis and its regulation mechanism on the temperature rise of cement slurry
vol.209 (2026) Power-law creep in C–S–H emerging from subdiffusive dynamics
vol.209 (2026) From geopolymerization to ceramicization: How reaction extent and gel chemistry control crystallization in metakaolin-based Na-geopolymers
vol.209 (2026) Mechanistic design of calcium sulphoaluminate cement for Cr(VI) immobilization
vol.209 (2026) Iron carbonates in accelerated cementitious systems: effects on microstructure, compressive strength, and durability properties
vol.209 (2026) Mechanism underlying effect of competitive adsorption between VMA and PCE on plastic viscosity of cement paste
vol.209 (2026) A process-oriented perspective on multi-K 3D concrete printing
vol.209 (2026) Mechanistic insights into the aqueous carbonation of calcium silicate glasses: Coupling of disordered network structure, dissolution kinetics and carbonation reactivity
vol.209 (2026) Chloride binding isotherms for Alkali-Activated Slag systems — Pitfalls in the equilibrium method and data interpretation
vol.209 (2026) Decoupling skeleton stability and water dynamics in C–S–H by in situ SAXS and H2O/D2O-atmosphere SANS
vol.209 (2026) Ca/Si-dependent water retention of calcium silicate hydrate (C-S-H): Towards drying shrinkage reduction
vol.209 (2026) Green strength characterization of 3D printable mortar using spherical penetration tests and Bayesian inverse modeling with an artificial neural network surrogate
vol.209 (2026) Blending the organic cane sugar in an inorganic lime system for improved resistance to salt weathering
vol.209 (2026) Impact of calcined clays additions on phase assemblage and mechanical strength of autoclaved low-clinker fiber cement matrices
vol.209 (2026) Poly(2-methyl-2-oxazoline) based polycarboxylate superplasticizers: A new perspective on the structure-property relationship of polycarboxylate ethers (PCE)
vol.209 (2026) Editorial Board
vol.209 (2026) Revealing the fate of superplasticizers in blended cements
vol.208 (2026) Mechanochemical synthesis of hydraulically reactive calcium silicate minerals via thermally-assisted mechanical grinding
vol.208 (2026) Effect of linear water-soluble polymer chain length on the micro-nano structure and chloride diffusion behavior of polymer-modified calcium silicate hydrate
vol.208 (2026) The tough life of an ettringite crystal and its consequences on packing and rheology
vol.208 (2026) Diverging mechanisms of calcium aluminate in carbonated matrix: Passivation as micro-aggregate reinforcement vs monocarboaluminate-driven densification
vol.208 (2026) Evaluating concrete affected by internal swelling reactions (ISR) using the extended version of the damage rating index (DRI)
vol.208 (2026) Quantifying rheology and microstructure of hydrating Portland-Limestone Cement blends to address additive manufacturing needs
vol.208 (2026) The fate of iron during hydration of white Portland cement-fayalitic slag
vol.208 (2026)
vol.210 (2026) Chemistry of hydrogrossular
vol.210 (2026) From on-line to in-line quality control of the bulk yield stress for digitally fabricated concrete
vol.210 (2026) Revealing air-liquid dynamics during long-term saturation of cementitious materials via X-ray CT
vol.210 (2026) Perspectives on waste materials and by-products integration into 3D concrete printing (3DCP)
vol.210 (2026) Early-age drying, shrinkage, and cracking in printable and printed cementitious materials
vol.210 (2026) Climate change contribution of 3D printing technologies: the trade-off between material and process impacts and its dependency on geometry
vol.210 (2026) Understanding the thermal behaviour of MSWI bottom ash foamed ternary geopolymer: The fundamental role of pore structure
vol.210 (2026) Mitigating the strength–accuracy trade-off in calcium aluminate cement-based selective cement activation 3D printing via powder-bed regulation of liquid penetration
vol.210 (2026) Modified bauxite residue blended cements – The effects of Na- and Al-rich pozzolans on phase assemblage and pore solution composition
vol.210 (2026) Hydrodynamic viscosity of highly concentrated cement suspensions: A comparative study on the determination methods
vol.210 (2026) Spectroscopic and thermodynamic insights into selenite sorption on hydrotalcite-pyroaurite solid solutions
vol.210 (2026) Role of initial pH on the formation and carbonation kinetics of calcium silicate hydrate (C-S-H)
vol.210 (2026) Comparing polycarboxylate and -phosphate ethers as stabilizers for C-S-H based cement accelerators
vol.210 (2026) Multistep atomistic investigation of nonclassical nucleation pathways in GPTMS/PVA-modified cementitious composites
vol.210 (2026) A study on the crystallization kinetics and nucleation rate models of MICP based on microfluidic experiments and numerical simulation
vol.210 (2026) Deformation of cement-based materials under drying with thermal cycling: Mechanisms governed by C-S-H solid-moisture interactions
vol.210 (2026) The path to low-carbon 3D printable concrete: Benchmarking the present to shape the future
vol.210 (2026) Thermodynamic properties of alumina-silica gels in cementitious materials
vol.210 (2026) Enhancement of mechanical performance in metakaolin-based geopolymer by cyclic loading and creep process in relation with microstructural evolution
vol.210 (2026) Design of ultra-low water content geopolymers through particle packing optimization: Reaction kinetics and performance
vol.210 (2026) Enhanced cementing efficiency of calcium silicate hydrate in cement pastes under elevated-temperature curing: decoupling from pore structure effects
vol.210 (2026) Validation of 5-minute UR2 on a dataset of 140+ calcined clays via low-cost colorimetry
vol.210 (2026) Inferring the effect of chemical additives on early-stage hydration and phase assemblage of magnesia-clay-based cement
vol.210 (2026) Machine learning-powered inverse design for 3D-printable engineered cementitious composites (3DP-ECC): Advancing insights into rheological properties
vol.209 (2026) Framing the future: 3D concrete printing, hybrid manufacturing and the role of artificial intelligence and machine learning
vol.209 (2026) Functionalized carboxymethyl chitosan synthesis and its regulation mechanism on the temperature rise of cement slurry
vol.209 (2026) Power-law creep in C–S–H emerging from subdiffusive dynamics
vol.209 (2026) From geopolymerization to ceramicization: How reaction extent and gel chemistry control crystallization in metakaolin-based Na-geopolymers
vol.209 (2026) Mechanistic design of calcium sulphoaluminate cement for Cr(VI) immobilization
vol.209 (2026) Iron carbonates in accelerated cementitious systems: effects on microstructure, compressive strength, and durability properties
vol.209 (2026) Mechanism underlying effect of competitive adsorption between VMA and PCE on plastic viscosity of cement paste
vol.209 (2026) A process-oriented perspective on multi-K 3D concrete printing
vol.209 (2026) Mechanistic insights into the aqueous carbonation of calcium silicate glasses: Coupling of disordered network structure, dissolution kinetics and carbonation reactivity
vol.209 (2026) Chloride binding isotherms for Alkali-Activated Slag systems — Pitfalls in the equilibrium method and data interpretation
vol.209 (2026) Decoupling skeleton stability and water dynamics in C–S–H by in situ SAXS and H2O/D2O-atmosphere SANS
vol.209 (2026) Ca/Si-dependent water retention of calcium silicate hydrate (C-S-H): Towards drying shrinkage reduction
vol.209 (2026) Green strength characterization of 3D printable mortar using spherical penetration tests and Bayesian inverse modeling with an artificial neural network surrogate
vol.209 (2026) Blending the organic cane sugar in an inorganic lime system for improved resistance to salt weathering
vol.209 (2026) Impact of calcined clays additions on phase assemblage and mechanical strength of autoclaved low-clinker fiber cement matrices
vol.209 (2026) Poly(2-methyl-2-oxazoline) based polycarboxylate superplasticizers: A new perspective on the structure-property relationship of polycarboxylate ethers (PCE)
vol.209 (2026) Editorial Board
vol.209 (2026) Revealing the fate of superplasticizers in blended cements
vol.208 (2026) Mechanochemical synthesis of hydraulically reactive calcium silicate minerals via thermally-assisted mechanical grinding
vol.208 (2026) Effect of linear water-soluble polymer chain length on the micro-nano structure and chloride diffusion behavior of polymer-modified calcium silicate hydrate
vol.208 (2026) The tough life of an ettringite crystal and its consequences on packing and rheology
vol.208 (2026) Diverging mechanisms of calcium aluminate in carbonated matrix: Passivation as micro-aggregate reinforcement vs monocarboaluminate-driven densification
vol.208 (2026) Evaluating concrete affected by internal swelling reactions (ISR) using the extended version of the damage rating index (DRI)
vol.208 (2026) Quantifying rheology and microstructure of hydrating Portland-Limestone Cement blends to address additive manufacturing needs
vol.208 (2026) The fate of iron during hydration of white Portland cement-fayalitic slag
vol.208 (2026)
